Turnbuckle assembly combinations include: Eye and Eye, Hook and Hook, Hook and Eye, Jaw and Jaw, Jaw and Eye.

Eye and Eye  Hook and Hook   Hook and Eye   Jaw and Jaw    Jaw and Eye

Crosbys Quenched and Tempered end fittings and normalized bodies have enhanced impact properties for greater toughness at all temperatures.

Hot Dip galvanized.

Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties.

Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4" through 2-1/2 ", a shackle one size smaller can be reeved through eye.

Forged jaw ends are fitted with bolts and nuts on sizes 1/4"  through 5/8", and pins and cotters on sizes 3/4" through 2-3/4".

TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.

Lock Nuts available for all sizes.

Typical hardness levels, Tensile Strengths and Ductility Properties are available for all sizes.

Turnbuckles can be furnished proof tested or magnaflux inspected with certificates if requested at time of order.

Rigging Screws or Turnbuckle for European Market. and Others Area.

Turnbuckle DIN 1480, Eye and Hook, Hook and Hook, Eye and Eye

Turnbuckle Commercial type Malleable Iron, Hook And Eye, Eye and Eye, Hook and Hook

Rigging Screw, Closed Body Turnbuckle, Jaw and Jaw, Eye and Eye, Eye and Jaw. Meet the standard of  DIN 1478

  High Carbon Steel Forged, Finished Hot Dipped Galv. or Electric Galv.